How the Tri-Band Repeater works:
The Stellahome-LGW repeater amplifies all three mobile frequency bands. 800Mhz, 900Mhz and 2100Mhz.
This repeater amplifies all networks and all standards. This will ensure that you get the best mobile experience inside your house/office.
- The outdoor antenna installed outside on your roof collects the mobile signal and sends it down the coaxial cable to the tri-band repeater.
- The tri-band repeater then amplifies this signal and re-transmits it into the area where you want coverage.
- Mobile phones and laptops in this area can then communicate with this improved signal.
This will cover you for all operators and standards, 2G , 3G and 4G. The LGW repeater amplifies the following frequencies:
Regulations for use: It is a legal requirement to obtain permission from an administrative authority, or consent from those involved in the frequencies emitted by the repeater.
Quick install guide
We recommend doing a "loose" install first, so that you can test where best to place your cables and antennas.
- Install the outdoor panel antenna in a location where there is good mobile signal. (usually this is your roof).
- Using the supplied 12m cable, run it down inside your house to the Stellahome repeater.
- Attach this cable to the repeater. Then attach the indoor panel antenna to the repeater.
- Plug in the power supply.
*All kits in the Stellahome family are supplied with an exterior panel
antenna, except the Stellahome 5 band, which uses an exterior Yagi