The MarineBoost 3.4, 3 band 4 port ship repeater is ideal for boosting mobile signal into large ships / boats. The high gain omni-directional antenna is installed high up on the ship to receive the signal in all directions. SD400 low loss cable runs from this antenna down inside the ship to where the repeater is located.
Four interior panel antennas are connected to the repeater and can be placed in four separate locations inside the ship. One antennas is connected directly to the repeater for coverage in that location. The other three antennas can be extended to other locations within the ship using the supplied 3 X 15m cables (SD240).
Theses three cables are narrower and are easy to install.
Total internal coverage: 4 X 1000m2 = 4000m2.
The repeater is then plugged in. That’s the installation done.
When your ship passes within ~30Km of any mobile tower on the land, the MarineBoost 3.4 system will receive this signal and amplify it into the four areas of your ship.
The repeater kit:
Quick install guide
We recommend doing a "loose install" to begin with. Do not fasten down the cables until you have found where best to install the various parts.
Install the outdoor omni antenna somewhere secure on the outside of the ship.
Cable from this antenna down inside the boat to the location where you want signal.
Install the booster and indoor antenna here.
Finally, once you have attached all the cables, plug in the power.