StellaHome-LGDWH | 5 band repeater | Boosts 800,900,1800,2100 and 2600Mhz

How the 5 band repeater works:

• The outdoor antenna receives the mobile signal (GSM, 3G, 4G) in your area, and sends it down the cable to the Stellahome 5 band repeater.
• The 5 band repeater then amplifies this signal and re-transmits it into the area where you want coverage.
• Mobile phones and devices  in that area then communicate with this improved mobile signal.

This repeater amplifies all networks and frequencies.

GSM (900Mhz) + 3G (2100Mhz) + 4G (800/ 1800/2600Mhz).

This will cover you for all options, including 4G into the future.

Summary:

As you can see, the Stellahome 5 band repeater does the lot. You don’t need to know what networks run on what frequencies. You also don’t need to worry about the future and whether your repeater will work with the new 4G networks..

You are future proofed with this repeater.

Quick install guide

We recommend doing a "loose" install first, so that you can test where best to place your cables and antennas.

1. Install the outdoor panel antenna in a location where there is good mobile signal. (usually this is your roof).
2. Using the supplied 12m cable, run it down inside your house to the Stellahome repeater.
3. Attach this cable to the repeater. Then attach the indoor panel antenna to the repeater.
4. Plug in the power supply.

  *All kits in the Stellahome family are supplied with an exterior panel antenna, except the Stellahome 5 band, which uses an exterior Yagi antenna.  

Download PDF