3 Year Warranty

30 Day Guarantee

Worldwide Shipping

StellaOffice-G Kit Repeater | GSM Office repeater

  • Provides GSM  signal at 900Mhz for your large building.
  • Coverage:  4000m2  (up to 15 rooms)
  • Compatible with all European mobile operators.
  • Unlimited number of calls / data sessions at the same time.
  • Ce certified
  • Signal power and diagnostics indicator.
  • Manufactured in Ireland
  • Complete operator network protection.
  • 3 year guarantee
Local Shipping: 2 days International Shipping: 4 days


(€647.97 ex-VAT)

The StellaOffice-G 900Mhz repeater.

The stellaOffice-G repeater is ideal for amplifying voice calls inside your office or large building. You can attach up to 4 internal antennas to this repeater. This will enable you to provide internal coverage in 4 different areas inside your building, each area is about 3-4 rooms in size.

The Signal LEDs on the repeater show you diagnostic information that will help you install the repeater correctly.

How it works.

The outdoor antenna receives the operators GSM signal at 900Mhz. Many operators now transmit 3G at 900Mhz also, and in the future they will put 4G at 900Mhz also.

This signal is sent via coaxial cable to the StellaOffice-G installed inside your building.

Here, the signal is amplified and sent to each of the 4 ports of the repeater, which are connected to 4 antennas.

These antennas can be placed in 4 different areas inside your building, that require coverage.

In total, up to about 15 rooms can receive coverage, depending on the size of the rooms.



(€647.97 ex-VAT)

Quick install guide

EN_what you get_office_800 StellaOffice_diagram1

We recommend doing a "loose" install first, so that you can test where best to place your cables and antennas.

  1. Install the outdoor panel antenna in a location where there is good mobile signal. (usually this is the roof).
  2. Attach the 15m cable to this antenna and run it down inside the building to the Stellaoffice repeater.
  3. Attach this cable to the repeater. Then attach 1-4 cables to each of the  ports the the repeater.
  4. Cable from these ports to 4 locations that require coverage.
  5. Plug in the power supply.
Download PDF