StellaOffice-LGDWH 5 Band repeater | Boosts all 5 mobile frequency bands for your Office

How it works:

This  5 band repeater insures you cover all available networks: GSM, 3G and 4G. Used for large buildings where the indoor coverage is weak or non existent. The Stellaoffice 5 band repeater is very useful for offices where people will on different operators, and will be using voice, email and 3G/4G internet at the same time. All options are covered so  you don’t need to think about which frequency to use.

The frequencies.

• 800/1800/2600Mhz: These three frequencies are used for 4G to give the the most bandwidth available.
• 900Mhz: Great for voice calls. And for all phones, including older model phones.
• 2100Mhz: great for voice calls, and fast 3G data.

Coverage.

This repeater has 4 indoor antennas. Each antenna will amplify 1000Mt2 (~3 rooms), so in total, this kit provides up to 15 rooms coverage.

Quick install guide

We recommend doing a "loose" install first, so that you can test where best to place your cables and antennas.

1. Install the outdoor panel antenna in a location where there is good mobile signal. (usually this is the roof).
2. Attach the 15m cable to this antenna and run it down inside the building to the Stellaoffice repeater.
3. Attach this cable to the repeater. Then attach 1-4 cables to each of the  ports the the repeater.
4. Cable from these ports to 4 locations that require coverage.
5. Plug in the power supply.

Download PDF