|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
| These are professionally made, economically priced antennas. This design has the highest strength/weight ratio. These are high efficiency antennas whose gain figures approach the theoretical maximum for the individual curved surface area.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Parabolic
Antennas 
SPECIFICATION
DETAILS | MODEL | Gain dBi | 3dB Beamwidth | Ratio cross polar | Ratio B to Front | Size (Cm) | Windage (Newtons @216km/h) | Weight (Kgs) |
| 49 SD15 | 14 | 28 | 20 | 45 x 25 | 114 | 1.5 | |
| 49 SD19 | 24.4 | 8deg. | 24 | 24 | 51x51 | 301 | 3 |
| 49 SD21 | 26.3 | 6.4 deg. | 26 | 28 | 61x61 | 376 | 3.5 |
| 49 SD24 | 28 | 5.2 deg. | 28 | 32 | 76x76 | 476 | 4 |
APPLICATIONS
- Complies to ETSI EN 301 525 V1.1.1 (2000-03)TS3
- IEEE 802.11a wireless LAN system, Wimax and wifi system compatible
- Amongst others, can be used with Lucent, Proxim, Buffalo, Breezecom, Alverion, Cisco, D-Link, Intel, Linksys, Samsung, Symbol and Avaya.
- Used in conjunction with wireless access point / client
- Used for point to point links, point to multi point links, ISM, WLAN, data/telephony and CCTV
FEATURES
- These professional Antennas are outdoor weather sealed and individually tested gas-tight
- Welded steel gives maximum strength/weight ratio
- Lowest windage, and highest survival rate, in independent wind tunnel tests
- These antennas can be tilted (standard pole mount brackets with optional tilt brackets)
- Material-welded wire hot dip galvanised - no rust
- Nesting, and fully stackable on the flat in the warehouse. Most compact for shipping.
- Dimensions of wire-14G in mesh 12.5mm X 25mm
- Method-press formed from flat panels for uniformity
- Brackets are made from galvanised steel.
- Dipole boxes are made from ABS shock resistant plastic for maximum durability.
ASSEMBLY INSTRUCTIONS
SD19,
SD21, SD24 Assembly Drawing
ELECTRICAL
SPECIFICATIONS
- Input power = 50 watts
- Connector "N" type Male
- Impedance at output = 50 ohms
- VSWR = 1.4 : 1 (typical)
- Coaxial Pigtail- RG 174
WIND
TUNNEL TEST RESULTS
Wind tunnel tests prove that they will stand up to high winds. For instance, the model SD19 has been rotated slowly in a wind tunnel with wind force 305km/h without damage or direction change.
