1.4 Ghz Parabolic Antennas

 
Stella Doradus Antennas

1.4GHz Parabolic Antennas

Parabolic Grid

Solid Parabolic Dish

  • Complies to ETSI EN 301 525 V1.1.1 (2000-06)TS3
  • These professional Antennas are outdoor weather sealed and individually tested gas-tight
  • These antennas can be tilted (standard pole mount brackets with optional tilt brackets)
  • N-male type connectors.
  • N-female / SMA adaptor available - please enquire
  • Nesting, and fully stackable on the flat in the warehouse. Most compact for shipping.
  • Brackets are made from hot dip galvanised steel.
  • Installation is made easier as wing nuts are used throughout.
  • Dipole boxes are made from ABS shock resistant plastic for maximum durability

1.4Ghz Parabolic Antenna

1.4GHZ PARABOLIC GRID ANTENNAS

These are professionally made, economically priced antennas. This design has the highest strength / weight ratio. Wind tunnel tests prove that they will stand up to high winds. For instance, the model SD19 has been rotated slowly in a wind tunnel with wind force 305km/h without damage or direction change.

  • Lowest windage, and highest survival rate, in independent wind tunnel tests.
  • Dimensions of wire-14G in mesh 12.5mm X 25mm
  • Method-press formed from flat panels for parabolic integrity.
  • Welded steel gives maximum strength/weight ratio
  • Material-welded wire hot dip galvanised - no rust

Example Frequency Range 1350 - 1450 MHz

MODEL Downloadable links Gain dBi 3dB Beamwidth Ratio B-to-F Ratio Cross-P Size (Cm) Windage (Newtons @216kmph Weight incl. brackets(Kgs)
14 SD19 Spec sheet 14 18deg. 26 22 51x51 114 1.75
14 SD21 Spec sheet 16 15 deg. 24 24 61x61 376 2.1
14 SD24 Spec sheet 18 12 deg. 28 26 76x76 476 2.7
14 SD27 Spec sheet 19 10 deg. 32 28 91x91 591 3.7
14 SD30 Spec sheet 20 8 deg. 35 35 122x122 1050 13.2

Adobe Acrobat Wind Tunnel Test Results

 

1.4GHZ PARABOLIC SOLID ANTENNAS

High efficiency, easy to assemble, solid parabolic dishes. These come in frequency ranges from 1.4GHz to 5.8GHz. Please enquire quoting frequency required.

Example Frequency Range 1350 - 1450 MHz

MODEL Downloadable links Gain dBi 3dBi Beamwidth Ratio cross polar Ratio B to Front Size (Cm) Windage (Kg @216km/h) Weight (Kgs)
14 PSD 61 Spec Sheet 15 24 deg 32 34 61 x 61 85 6kg
14 PSD 113 Spec sheet 20.4 15 deg 40 38 126 x 126 359 22.7

ASSEMBLY INSTRUCTIONS

ACCESSORIES

Electrical SpecificationsELECTRICAL SPECIFICATIONS

  • Input power = 100 watts
  • Connector "N" type Male or Female
  • Impedance at output = 50 ohms
  • VSWR = 1.5 : 1 (typical)
  • Coaxial Pigtail- RG 223

Contact us: info@stelladoradus.com

Contact us USA: pspooner@mindspring.com



© 2010
Stella Doradus. All rights reserved. Created by Nevada
 
Stella Doradus
Español USA
Deutsch Francais
Home
Company Profile
Research & Quality Control
Contact Us
Contact Us - America
Wimax
Wimax
24GHz PtP Link
24GHz PtP Link
Weatherproof Enclosure
Weatherproof Enclosure
Multi- Antennas
Dual Polarity Antennas
MIMO Antennas
Dual / Tri / Quad Band
800-900 MHz Antennas
RFID
MMDS - 2.1 to 2.7 Ghz
Planar
Omni-Directional
Parabolic
Transmit Antenna
1.4 Ghz Antennas
Planar
Omni-Directional
Parabolic
1.7 - 1.9 Ghz (GSM) Antennas
Planar
Omni-Directional
Parabolic
Base Station
UMTS Antennas
GSM + UMTS
Parabolic
Omni-Directional
2.4 Ghz Antennas
Planar
Omni-Directional
Parabolic
Base Station
Circular Polarised
Dual Polarity
Ceiling Mount
Up / Down Converter
3.2 - 3.8 Ghz Antennas
Planar
Omni-Directional
Parabolic
Base Station
4.9GHz Antennas
Planar
Omni-Directional
Parabolic Grid
5.2 - 5.9 Ghz Antennas
Planar
Omni-Directional
Parabolic
Base Station
Other
Other Antennas
Accessories
Bracketry
Cable
Pigtails
Connectors / Adapters
Filters
Crimpers
Lightening Protectors
Splitters
Power Supplies
Installations
Antennas
Top of Page